Janome 6234XL Overlocker - : FREE DELIVERY

Buy this
  • £449.00

Demonstration Model in Showroom

The 6234XL makes overlocking so easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated.

The rolled hem conversion feature eliminates the need to change the needle plate, presser foot or tension setting. Restructured lower looper guides allow easy access.



Easy rolled hem change over

No need to change the needle plate for rolled hemming. Just slide the needle plate setting knob to the "R" position to switch the chaining finger to the rolled hemming position.


2 thread overlocking

Set your overlocker for 2 thread use by sliding thread guide from 3 or 4 thread position to 2 thread position and attach spreader to right looper.


Lower looper threading

By rotating the threading lever, the lower looper thread guides will be accessible, making threading easy. Turn the balance wheel and the threading lever will return to its original position.


Retractable knife

The upper knife can be quickly and easily deactivated when not required.


Adjustable cutting width

Easily adjust the cutting width to suit the thickness of the material. An easy way for correcting the seam tension.


Thread cutter

The thread cutter is conveniently located on the side of the machine and trims the thread neatly and easily.


Tension release

Lifting the presser foot automatically releases the tensions which allows you to easily draw the threads through when threading, just like a sewing machine.

SKU
Janome 6234XL